Instruction manual
Preparation: Remove loose dirt from the surface. If necessary, cover surfaces that are not to be treated. Mayaffect metals. Test product on a less visible spot.
Manual application: Spray the surface to be cleaned thoroughly with Arvox Pro A and wet completely. Then apply Arvox Pro B in the same way and work it in with a grout brush, cleaning pad or scrubber. Rinse/rework the treated surface with water and brush after approx. 5-15 minutes.
Machine application: Apply Arvox Pro A and B one after the other to the floor with a low pressure sprayer. Leave on for approx. 5 - 10 minutes, depending on the degree of soiling. Clean the entire surface with a cleaning machine and a suitable cleaning pad. Thoroughly vacuum the treated floor, rinse with clean water and vacuum again, if necessary.
Note: Apply Arvox on a dry surface. Do not use in strong sunlight or moisten the surface slightly if necessary.
Coverage: approx. 5-10m2/L (0,5 L per component)