Instruction manual
Preparation: Cover adjacent surfaces if necessary. Arvox Pro may affect metals. The colour of the wood may change after treatment. Transfer components A and B each into a low-ressure sprayer. Test on a less visible spot.
Manual application: Spray the surface to be cleaned thoroughly with Arvox Pro A and wet it completely. Immediately apply Arvox Pro B in the same way. Work in with a suitable cleaning pad or brush. Allow to react briefly and wipe up. Wipe thoroughly with clean water until all dirt residues have been removed.
Machine application: Apply Arvox Pro A and B one after the other to the wooden floor with a low-pressure sprayer. Allow to react briefly. Clean the entire surface with a single-disc machine and a suitable cleaning pad. Remove dirt with a scrubber-suction machine (roller brush and fresh water). After sufficient drying time, the floor can be re-treated. Follow the cleaning instructions of the floor manufacturer. Check surface compatibility on a less visible spot.
Note: Apply Arvox on a dry surface. Do not use in strong sunlight or moisten the surface slightly if necessary.
Coverage: approx. 5-10m2/L (0,5 L per component)
